Skip to main content

Software Upload to a Voice Device

The best option for updating software on your Poly Voice device is to use Poly Lens. However, if you need to update software on a Voice device that is not connected to the internet, you can download the software from Poly Lens and upload it to the device manually.

UCS (Voice) Device Software Update​

The Software Update on UCS (Voice) Device is performed through the the Poly Lens Cloud or the System Web Interface of the Voice Device.

Update Software on a UCS Device with Poly Lens​

Check for Software Update

Use Poly Lens to update the software for your connected devices. You can update the software immediately or choose to delay the update notifications to a later time.

The following are the options for updating software with Poly Lens:

Install Device Software Manually

  1. Open Poly Lens.
  2. Download the software bundle from the Poly Lens Cloud. See Download UCS (Voice) Software Bundle for detailed instructions. Load the Software Bundle to a USB drive.
  3. Save the package to the root directory of a USB flash drive and unzip the file.
  4. Connect the USB flash drive to a USB port on the back of the system.
  5. If the system detects the USB flash drive, a prompt displays on the monitor to confirm that you want to update the software. If there’s no input to the system, it automatically starts the update after a short delay.

Note: See the Poly Device Administrator Guide for detailed instructions on how to update the software on your device.